Fuel Injection Pump Test Bench | 8PSB-Mini

KC300 8 Cylinder Fuel Injection Pump Test Bench

Model Number:MINI 8PSB
Power Supply:220VAC/380VAC
Phase:Single Phase/Three Phases
Power(kw): 7.5 11
Main tank capacity:30 litres
Puma speed:0-4000 revolution
Number of Cylinders: 8
Height of principal axis center (mm): 125
Volume of big and small volumetric cylinder(ml): 150 45
Flywheel inertia(kg*m) 0.8~0.9
Positive pressure of air supply(Mpa): 0~0.3
Negative pressure of air supply(Mpa): -0.03~0
Control temperature of fuel (°C): 40±2
DC electrical source (V): 12 24
Dimension：180x72x154cm

Get a Quote

Description

Adjustable cylinders	Out power(Kw)	RPM	Rpm pre-set	Temperature control system	Positive pressure system	negative pressure system
8	7.5,11,15 ,18.5,22	0-4000	√	√	√	√
Air supply	DC power supply	Internal pressure of VE pump	Oil return of VE pump	travel of tooth bar	Oil lubricate	Capability with pump type
√	√	√	√	(optional)	(optional)	All in- line and rotary pump

Injection Pump Test Bench Main function
1.Measurement of each cylinder delivery at any speed.
2. Test point and interval angle of oil supply of injection pump.
3. Checking and adjust the mechanical governor.
4. Checking and adjusting the distributor pump.
5. .Experiment and adjusting of behavior of supercharging and compensatory device.
6. Measurement of oil return of distributing pump
7. Testing of the electromagnetic valve of distributor pump.(12V/24V)
8. Measurement of the internal pressure of distributor pump.
9. Checking of the advance angle of advance device.(on request)
10. Checking the sealing of injection pump body
11.Install tube of auto-sucking oil supply can check on oil supply pump(including VE pump).
12. Checking the travel of stroke (on request)
13. Advance angle checking

MINI 8PSB Diesel Fuel Inection Pump Test Bench Characteristics.
1. Changing frequency changing rotational speed
2. Low fall of rotational speed and high output torque
3. High measurement precision;
4. The functions of over voltage, overload and short circuit protection;
5. Ten classes Rotation speeds presetting;
6. Constant temperature controlled;
7. Ultra low noise;
8. Operating position: arbitrary side of the two work sides of the test stand;
9. Built-in air resource;