Dieseltester

Injection pump test stand

 

Fuel injection pump test stand, which includes: the body, motors, fuel injection angle dial, table, was the fuel pump bracket side, the side surface inspection device, standard
Priming pump nozzle, rotary arm, rotary arm column, speed gear, speed head, control devices, fuel tank, high pressure gauges, low pressure gauges, control cabinet,
Control panel, emblem machine high pressure pump tester, etc., whose assembly
Body: the main test bed, on which are mounted table, the measured fuel pump holder, liquid level detection side of the device, its built with motors, fuel tanks,
Governor and other gear;
Motor: fixed on the base of the fuselage, the output shaft fitted with gun gear couplings. Connected to the fuel pump through the coupling with the measured spindle;
Speed ​​gear: the gear is fitted below the speed gun head;
Workbench: a platform mounted on the fuselage, the measured engine fuel pump installed in the work
A stage for the holder, the bottom of the table is mounted a rotary arm, the rotary arm in
Within a certain range of rotation; rotary arm column: its lower end fixed to the rotary arm, which is fixed to the upper end of the liquid through a clamp
Face detection means;
Tank: The test stand is oil source, providing the fuel injection pump to the test
Tank Installation: in the fuselage bottom shelf, through the catheter and injection pump and liquid level detection device under test phase;
Control cabinet: the body part of a separate individual, it built with speed control devices, and other electrical components, these devices via cable and electrical components mounted on the body
Phase corresponding device in the control cabinet, equipped with control panel for operating the test bench

 

Fuel injection pump test stand, which includes: the body, motors, fuel injection angle dial, table, was the fuel pump bracket side, the side surface inspection device, standard

Priming pump nozzle, rotary arm, rotary arm column, speed gear, speed head, control devices, fuel tank, high pressure gauges, low pressure gauges, control cabinet,

 

Control panel, emblem machine high pressure pump tester, etc., whose assembly

 

 

Body: the main test stand, on which are mounted table, the measured fuel pump holder, liquid level detection side of the device, its built with motors, fuel tanks,

Governor and other gear;

Motor: fixed on the base of the fuselage, the output shaft fitted with gun gear couplings. Connected to the fuel pump through the coupling with the measured spindle;

 

Speed ​​gear: the gear is fitted below the speed gun head;

 

Workbench: a platform mounted on the fuselage, the measured engine fuel pump installed in the work

 

A stage for the holder, the bottom of the table is mounted a rotary arm, the rotary arm in

 

Within a certain range of rotation; rotary arm column: its lower end fixed to the rotary arm, which is fixed to the upper end of the liquid through a clamp

 

Face detection means;

Tank: The test stand is oil source, providing the fuel injection pump to the test

 

Tank Installation: in the fuselage bottom shelf, through the catheter and injection pump and liquid level detection device under test phase;

 

Control cabinet: the body part of a separate individual, it built with speed control devices, and other electrical components, these devices via cable and electrical components mounted on the body

 

Phase corresponding device in the control cabinet, equipped with control panel for operating the test stand