Diesel injection pump test bench computerised type, for testing all kinds of diesel fuel injections pumps, mechnical pumps, same function as Bosch EPS619
1. Changes frequency rate and changes rotate rate of the diesel injection pump ;
2. Small fall of rotation speed and large output torque;
3. High measurement precision of the diesel injection volume
4. The functions of overvoltage,overload and short circuit protection
5. Ten types of rotate rate preseting for different diesel pumps;
6. Temperature kept constantly
7. The diesel injection pump tester with very low noise
8. Operating position:arbitrary side of the two work sides of the test bench;
9. Rotation speed,cout,temperature,air pressure are display on 15”LCD
10. .Built-in air resource
2. Function
1. Measures the cylinder’s fuel volume at different rotate rate
2. Checks the cylinder’s pulse at static status
3. Inspects the mechnical speed drive of the diesel injection pump
4. Inspect the electricmagnetic valve of distribution pumps;
5. Inspects the gasdynamic speed governors' working status;
6. Checking of the pressure compensators(LDA)
7. Measurement of the reflux delivery of distributor pumps;
8. Measurement of the internal pressure of the distributor pumps body;
9. Measurement of rack travel(option).
10. Measurement of advance angle(option).
12. Checking of diesel injection pump's internal seals.
3. Technical Parameters
1. Rotation rate :0~4000RPM
2. Two types test tubes:45cc, 150cc.
3. Capactiry of fuel tank:60L
4. Temperature rane: 40±2℃
5. Test oil filtering unit: 5μ
6. Test bench D.C.Supply:12V/24V
7. Feed pressure:low: 0~0.4MPa,high: 0~4Mpa
8. Air pressure: +0~0.3MPa, -0.03~0Mpa
9. 3-phase power voltage:380V/220v or on request
10. Flywheel inertia: 0.8KG·M2
11. Center height of the diesel injection pump test bench:125MM
12. Standard power: 7.5KW,11KW、15KW or on request
13. Overall dimensions(MM): 2360×960×1870 or on request
14. Net weight(KG):about 1300
« Common rail test bench CRS709 Common rail UIS UPS and HEUI test bench CRS709 »